Re: [MPlayer-users] Re: failed to compile mplayer(cvs) with xvid

[Corey Hickey <bugfood-ml@xxxxxxxxxx>]

yong wrote:
> > I don't see anything wrong from here. I would suggest trimming down your 
> > command lines some -- remove all the unnecessary options you can and see 
> > if the problem goes away. If it does, try selectively adding and 
> > removing options until you come upon the one(s) that cause trouble.
>
> After some quick test, i found out the vrc_strategy=1 doesnt like the qprd 
> and
> adaptive quantization(*_masking options), if i add these options to cli with
> vrc_strategy=1, the 2nd pass encoded video bitrate will increase alot depending
> on  resolution.
>
> I didnt test the xvid rc much, but i certainly sure it works :)

Ok. You ought to subscribe to the ffmpeg-devel mailing list and report 
your bug there. Be sure to include sample command lines. Also, one thing 
you should clarify when you send a message there: Do qprd and *_mask 
have trouble on their own, or is it the combination of the two that 
causes problems?

If Michael Niedermayer gets enough information he can probably fix it. 
Otherwise, I can document the incompatibility in the mplayer man page.

Anyway, I've always had mixed feelings about whether qprd and *_mask are 
a good idea to use. You might not be worse off without them.

> > Eventually, when you figure it out, we may need access to your source 
> > file, or at least enough of it to reproduce the problem. Use dd to trim 
> > it down to the smallest portion you can reproduce the problem with, and 
> > upload the small file to ftp://www.mplayerhq.hu/MPlayer/incoming
> its happen to all of my mpeg1 video clips...

No problem. I was just trying to cover most eventualities.

-Corey

_______________________________________________
MPlayer-users mailing list
MPlayer-users@xxxxxxxxxxxx
http://mplayerhq.hu/mailman/listinfo/mplayer-users